Embroidery hot-melt adhesive film, produced with 100% PE new material and special blowing and pressing film technology, is a new product that replaces the traditional non-woven fabric (paper lining). Now, it has been fully used in the domestic computer embroidery industry to replace the paper non-woven fabric processing. It solves the problem that the paper lining is not easy to be peeled off and the finished embroidery product is easy to wrinkle after being peeled off, which makes the product defective, time-consuming and unattractive. It can completely solve the above problems. The production specifications are flexible and changeable, the thickness can be produced between 0.02mm and 0.12mm according to the number of stitches, the range can be made between 500mm and 2100mm according to the width of the embroidery machine, the length can be produced by customers (generally less than 500 yards), and the quality level can be produced according to the quality of the embroidery product and the needs of environmental protection, The color can be transparent, white, gray, black, red, green, yellow, blue, green and other colors according to the embroidery color. The appearance is divided into embossing on the front and light on the back, and light on both sides (double light is not recommended).
Main features:
1. Embossing can prevent cloth from sliding and shifting;
2. The embossed air hole has a soft cushion effect on the cloth;
3. Low temperature and low pressure stripping, easy to peel, fast melting without odor;
4. Remove the film, ventilate and clean non-stick cloth;
5. Applicable to all fabrics with embroidery;
6. Direct needlework, environmental protection and non-toxic;
7. Compared with the embroidery water-soluble film processing method, the cost is saved;
8. The embroidery process is neat and clean without residual fibers;
9. The environmental protection does not contain formaldehyde, which is suitable for the high requirements of children's clothing.